Hutchison

HOME

Applications

Pumps

Suction systems or dischargers of fluids, pumps are widely deployed, whether fixed or onboard. Often motorized, they generate vibrations. The antivibrationmounts reduce their noise pollution, and extend the life of moving parts.

Elastomer Mounts:

Radiaflex®

Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.

Paulstradyn®

Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.

Paulstrafloat®

The machine may be placed with its mounts directly on the ground; Quick installation; Rubber protected against harmful liquids; Very suitable for mobile equipment.

Stabiflex

Easy movement of suspended machinery; Cup to protect the rubber and distribute the load; Simple to fit.

VIB HD 56

Anti-vibration and shock mount for navy, high loads, medium deflection, low frequency.

Beca

TheBeca mount with protective cap, small footprint. Very slim; Speed of fixing; Simple removal of the assembly; Extensive loading range.

Vibmar

Anti-vibration and shock mount for navy. Heat resistant; Simple installation; Wide temperature range.

VIB HD 45

Anti-vibration and shock mount. Wide load range; Low frequency and multi-application.

S.L.F Mounts

Designed for off-road vehicles and cabs. Small loading and high deflection; High damped silicone; Zinc plated mild steel for improved fatigue strength.

GB 530

GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core. High deflection under shocks; Long life; Low natural frequency; Low amplification at resonance.

VIB LD 03

Navy shock proof and vibration mount with double mounting level.

Metal Mountings:

V164/V168

The upper and lower stainless steel cushion are the resilient elements of the mount. Very suitable for isolating light machine tools.

V1H751/V1H752

The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.

V1H-6000/V1H-6100

V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.

V1B1114 / V1B1115 / V1B1116 / V1B1134 / V1B1135 / V1B1136

This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.

MV801/MV803

MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.

Acoustic Foams:

Acoustic and thermic silicone foamPaulstra