Compressors

The air compressors are sources of important vibrations. Therefore, they require the implementation of low-frequency suspensions, elastomer or metallic, allowing the decreasing of vibratory & acoustic levels and the protection of structures.

Elastomer Mounts: 
Metalwork: mild steel, plated; Natural rubber, bonded, cylindrically shaped; Simple and economical; Several styles for choice.
Antivibrationisolationfor static equipment; Stabilized characteristics during service life; High performance for corrosion; Good design and simple to fit.
The machine may be placed with its mounts directly on the ground; Quick installation; Rubber protected against harmful liquids; Very suitable for mobile equipment.
A very high axial elasticity; Progressive buffer against shocks or accidental overload.
Easy movement of suspended machinery; Cup to protect the rubber and distribute the load; Simple to fit.
Anti-vibration mount for stationary equipment with protective cover.
TheBeca mount with protective cap, small footprint. Very slim; Speed of fixing; Simple removal of the assembly; Extensive loading range.
Metal Mountings: 
The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.
V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Acoustic Foams: 
Mass heavy silicone foam, density 500kg/m3, weight from 1.25 to 5kg/m².
50 mm of corrugated PU Ether absorption foam. Self adhesive layer on one side. Temperature range: from - 25°C to +110°C.
NBR-PVC based waterproof cellular rubber thickness 30mm(±3mm), Self adhesive layer on one side. Temperature range : ...
NBR based waterproof cellular rubber, Thickness 33 mm. Self adhesive layer on one side. Temperature range static from
Dynamic sealings: 
Flexible Couplings
Couplings for high speeds for high torque.
Flexible Couplings: 
Seals for rotating shafts: simple or double lip
Cookies