Engines
Elastomer Mounts: 
The machine may be placed with its mounts directly on the ground; Quick installation; Rubber protected against harmful liquids; Very suitable for mobile equipment.
This anti-vibration mount comprised two elastomers which are assembled into a casting and pre-loaded. The mounting is very suitable for engine mounting, cab mounting and equipment mounting.
This mount has been designed to suspend fixed or mobile generators which require a high level of vibration isolation and shock protection
Anti-vibration and shock mount for navy, high loads, medium deflection, low frequency.
A flexible fixing resistant to oils, the majority of solvents and ageing; 80% reduction of vibrational energy transmitted from normal structural frequencies; Simple and economical; Simple to fix; Light weight.
Anti-vibration and shock mount for navy. Heat resistant; Simple installation; Wide temperature range.
Anti-vibration and shock mount. Wide load range; Low frequency and multi-application.
Designed for off-road vehicles and cabs. Small loading and high deflection; High damped silicone; Zinc plated mild steel for improved fatigue strength.
GB530 comprises of one part in elastomer bonded to a base plate and a tapped steel core. High deflection under shocks; Long life; Low natural frequency; Low amplification at resonance.
Navy shock proof and vibration mount with double mounting level.
Metal Mountings: 
The V1H751 and 752 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The system is possible to use them for mounting on board equipment in ships, rail, road transport, civil engineering plant or fixed machined that have to be floor mounted.
V1H-6000 and V1H-6001 steel mounts have a mounting plate, a cover and a swaged steel shaft. The system is suitable for mounting on board equipment on military ground vehicles and ships.
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Acoustic Foams: 
Mass heavy silicone foam, density 500kg/m3, weight from 1.25 to 5kg/m².
50 mm of corrugated PU Ether absorption foam. Self adhesive layer on one side. Temperature range: from - 25°C to +110°C.
NBR-PVC based waterproof cellular rubber thickness 30mm(±3mm), Self adhesive layer on one side. Temperature range : ...
NBR based waterproof cellular rubber, Thickness 33 mm. Self adhesive layer on one side. Temperature range static from
Dynamic sealings: 
Coupling flexible, compact, for reduced mounting nesting couples.
Coupling compact for reducing torque, mounting spigot.
Flexible Couplings
Couplings for high speeds for high torque.
Flexible Couplings: 
Seals for rotating shafts: simple or double lip
Cookies