Civil engineering
Elastomer Mounts: 
Very high axial loads; The suspended equipment is free to move in all directions; High resistance to atmospheric exposure.
Metal Mountings: 
Hutchinson have a range of all steel mounting whose essential element is the « steel cushion » made from woven stainless steel wire and compressed. Steel mountings have considerable mechanical strength as well as high damping characteristics in the order of 10 to 20%, depending on the application. Unaffected by corrosion. Steel mountings are unaffected by oil, grease, solvents, weather conditions and corrosive products. Unaffected by temperature. Steel mountings withstand temperature from -70°C to +300°C without any changes of the characteristics. Low natural frequency: Steel mountings with springs can have natural frequencies as low as 3 Hz, which can provide up to 80% attenuation for low speed rotating machineries.
This suspension system consists of rectangular cushions made of woven compressed stainless steel. The system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.
Standard or custom metallic cushions can be used for many industrial applications. They are naturally resistant grease, oil, water, dust, etc; Extension temperature range from -70℃ to +300℃; Stabilized with a long service life. High damping ratio.
This mount ensures good stability of the suspended equipment. The system is very suitable for rotating machines. All metal mount comprising a stack of between two and three woven steel, this make higher levels of isolation.
This range of mounts has several types. These very low frequency isolators (down to 3Hz) can be used to mount machine, achieving an attenuation of about 95%. They are all metal and can be used outdoors or in the hardest conditions. As they do not creep, their life time may be the same as that of the machine they are used to mount.
MV801/MV803 has a stainless steel wire mesh cushion and spring attached to aluminum alloy upper and lower cup with threaded center holes. Isolation of low speed stationary rotating machines and sensitive equipment.
Cookies